wheel refurb polished

Methods and Technology for Polishing Discs

The look of a car can say a lot about its owner. Not the last thing people are staring at are alloy wheels. Unfortunately, they can lose their shine and can become really dirty and fade. So it will be useful to know how to clean polished alloy wheels.

Thoroughly Wash the Alloys Wheels

polished alloy repair

In some cases a good rinse and dry may be enough for wheels. Anyway, it has to be the first step before the polishing. Take it seriously, because even small particles of sand can ruin all the work. It will be the best to use a specific cleaner for polished alloy wheel repair.

Quick and Easy Tips for Alloy Wheel Cleaning

  • Don’t use abrasive products, they are very harmful to the alloys.
  • To avoid soap spots, never wash the wheels while they are still heated.
  • Avoid steam, it also can bring harm to alloys.
  • During each stage of washing use a fresh cloth, it will help not scratch the alloys.

Good Dry the Alloy Wheels

repair polished aluminum wheels

It is the next stage of polished alloy wheel refurbishment. After thorough washing, do not be lazy to wipe the wheels well. You can use soft close for this. Remember, there should be no moisture on the surface, which may adversely affect polishing.

Apply a Brightener for Polished Alloy Wheel Repairs

Before getting to the main stage — polishing, use a special brightener liquid for the alloy wheels. Its purpose is to brighten metal details, also it very well handles with brake dust.

Apply an Alloy Polish for Repair Polished Aluminium Wheels of Choice

repair polished alloy wheels

Finally, it is time for the most important part of our work. When wheels have gone through such stages like washing, drying and brightening, you may be ready to start alloy wheel polish.

  • For this process, use a clean soft cloth. The best way to rub the polish into the alloy is to do it in the grain’s direction.
  • Notice that rubbing in the circles, cause it may come to a sticky end.
  • Try to work in a small section. If you try to cover too big a square for one time, the polish will dry too early before the rubbing.
  • To get in hard to reach places, you can use a small soft cloth or soft brush.

Apply a Finishing Polish for Repair Polished Alloy Wheels

Applying a finishing polish is the final stage of our repair. For this process, you can also use soft cloth. To polish should until the cloth will be free from liquid. Depending on the time you spend on this work will depend on the sheen of alloy wheels. So, don’t be lazy!

wheel refurb polished

The repaired polished wheels can totally change the appearance of the car. When wheels are well washed and shining, the whole look of the car becomes much better. You can use our polish advises refurbishing your alloy wheels.

Price from
Diamond Cut

All about Car Wheel Diamond Cutting Technology

This is the complete removal of the entire top layer from the surface of the discs in order to give them perfect evenness and shine. It could be done only in a specialized workshop using separate equipment – a special type of lathe. Such work is performed only at a high level – otherwise, you can simply harm the disk itself. The process is quite complex and should take longer than standard sanding.It recommended using only 1-2 times, because each time a thin layer of the disc is removed itself. So you can refurbish diamond cut alloy wheels only sometimes – but it’s worth it.
Read more about ➤ What is diamond cutting discs? ➤ Disc processing options.

Wheel Rim Straightaning

Wheel Rim Straightening – How it Should be Done

Wheels are a very important part in a car or motorcycle, a lot depends on their serviceability – both fuel consumption, and traffic safety, and ease of driving. However, it happens that the wheels get damaged, and most often the rim bends. There can be many reasons for this – it is enough to run over a curb or not notice a hole in the road, unsuccessfully cross an obstacle or collide with an obstacle on the road. Regardless of how you receive such damage, it is important to immediately contact a repair shop after receiving it.
Read more about ➤ Is it important to straighten the rim? ➤ How long will it take to repair ➤ How can a bent rim be repaired?

Wheel Rim Bend

A Bent Wheel Rim is a Common Problem

The first step to take is to run diagnostics to find out if the rim is subject to repair. Before you arrive for service, try not to damage the wheel further.
Then a professional tire technician will remove the tire from the wheel and clean the rim surface of any rust and dirt. The next steps of specialists will be associated with heating the surface of the rim and leveling it by placing it under a hydraulic press. Depending on the degree of bending, several such operations may be required.
Further steps will directly depend on the complexity of the repair. You may need to weld pieces of metal, use a lathe and other equipment for work. Professional craftsmen are usually ready for such difficulties. After finishing the leveling work, it may be necessary to powder or varnish.
Read more about ➤ How to know if the rim is bent ➤ Can a bent rim be straightened ➤ How can a bent rim be repaired?

Cracked Wheel Repair

Professional Cracked Alloy Wheel Repair Welders

The alloy rims are not just accessories for the appearance of the car. They are also a very important part of any car. Like all other details, aluminium wheels have an ability to crack and bent. So let’s take a look at the main cracked rim causes.
In case if you have noticed a crack on your rims try to repair it as soon as possible. Our hard workers will help you to inspect the wheel on the availability of some scratch, cracks, bents and other defects. We are ready to do everything to fix your rims in the shortest time. Be sure that here you can get the best services at reasonable prices.
Read more about ➤ Professional Cracked Alloy Wheel Repair Welders at Your First Call ➤ How to Repair a Cracked Alloy Wheel by the Stages.


Powered by WhatsApp Chat

× How can I help you?