Driving problems with a bent rim

Driving problems with a bent rim

Every driver faced this problem. Sloppy parking or heavy traffic… As you round the corner, you can feel your tire rub. Or, even worse, you feel the car jostle, and you bump up hard over the curb. It can happen to the best of us. In most cases, it’s totally fine, and you can get by with just the jolt itself. But sometimes the car shakes and vibrates, which is not good.

Is it possible to drive with a bent rim?

Driving on a bent rim is a bad idea! It can lead to further damage to the wheel, tire and steering. Bents rims will usually have a hard time maintaining a proper seal with the tire, this will lead to a loss in air pressure.

As a result, your car will experience a decrease in MPG and become more difficult to steer. In more extreme cases, a bent rim can cause your car to wobble at high speeds and can even result in a tire blowout.

Is it possible to drive with a bent rim?

How to understand that the rim is bent?

Common symptoms of a bent rim include:

  • wheel vibrates
  • a thumping sound that gets faster when you speed up
  • poor handling
  • a sunken spot on your tire
  • decreased MPG

How to understand that the rim is bent?

If your wheels are scratched, you have a few options:

  • replace the wheel. It’s the most expensive option, but it isn’t necessary
  • to hire a professional to repair wheel rim or refinish your wheel
  • DIY refinish wheel or smart wheel balancing at the best price in Dubai
  • hide the damage underneath a rim painting

While each of these options has its pros and cons, we think that RimBlades and/or RimSavers should be definitely on the list. Only RimBlades and RimSavers can protect your wheels from being damaged again in the future.

Also, regarding take-offs: Take-off rims are much easier to find for low cost, mass-market vehicles than for premium vehicles. Corvette or Porsche take-offs are hard to find–take-offs for a Hyundai Sonata? Not as hard.

Is it Possible to repair a Bent Rim?

RGX’s technology allows us to straighten rims of any style up to 26” in diameter. We use a combination of hydraulics, pulls, flange tools, heat, and experience to bring your damaged wheels back to factory specifications. Our dial indicators allow our certified wheel technicians to straighten your wheel to DOT & manufacture requirements. Bent wheels can become out of round from thirty thousandths to over one-hundred thousandths. Bent wheels can cause minor to severe vibration, uneven tire wear, damage to your steering column, or even a sudden blowout. Once our Certified Wheel Technician has examined your wheel, we will restore it back to a “true round” condition.

Price from
Powder coating

How is the rim powder coating

Powder coating will not only allow you to restore the former shine of any freshly repaired part, but also generally protect it from the negative effects of the environment. This is especially important for motorcycle wheel powder coating. Such painting has no restrictions regarding its application in the automotive industry, moreover, it is this technology that is used at the largest automobile factories, where it has long been proven to be effective and economical. However, all these benefits can be felt if the repair is done by professionals, since it is a rather complicated process.
Read more about ➤ The main advantages of powder coating ➤ Powder coating is the best option for repairs ➤ How to apply powder coating.

Wheel Rim Polish

Methods and Technology for Polishing Discs

The look of a car can say a lot about its owner. Not the last thing people are staring at are alloy wheels. Unfortunately, they have the ability to lose their shine and can become really dirty and fade. So it will be useful to know how to clean polished alloy wheels.
In some cases a good rinse and dry may be enough for wheels. Anyway it has to be the first step before the polishing. Take it serious, because even small particles of sand can ruin all the work. It will be the best to use a specific cleaner for polished alloy wheel repair.
Read more about ➤ Thoroughly Wash the Alloys Wheels ➤ Apply a Finishing Polish for Repair Polished Alloy Wheels.

Wheel Rim Refurbishment

Top 6 Reasons to Choose DentGuy Wheel Repair Service

When it is necessary to restore or repair cast discos, it is important to entrust this matter to professionals. The company “DentGuy” has been helping its customers to give new life to alloy wheels for more than 8 years. Complete replacement of wheels and rims is very expensive, and it is not always advisable to replace them with new ones. By contacting a trusted organization, you can significantly save money and get a high-quality recovery of your car’s disks. The masters know firsthand how to restore alloy wheels, use proven modern methods of work.
Read more about ➤ Why is it not recommended to repair car wheels and paint yourself ➤ Wheels and rims of which brands we can repair, restore


Powered by WhatsApp Chat

× How can I help you?