How to repair door dings
Very often, in a minor accident, a small dent appears on the door of a passenger car – as a result of contact of one car with the door of another. This most often happens in parking lots in Dubai malls, when the driver is either poor at correlating the distance between cars, or is simply not very experienced in parking.
This dent is most often oval or ovoid. It depends on the different degrees of force applied at the beginning and at the end of the impact. But, whatever form it may be, it is visually noticeable and degrades the visual appeal of the vehicle. Therefore, a driver who has noticed such damage on the door will certainly want to have it repaired.
Can these door dings be fixed?
Of course, this will not be too difficult to repair. DentGuy has an excellent Paintless Dent Repair for such a case. With its help, such damage on the doors of machines can be relatively easily corrected. Of course, the final result depends on many factors – on the severity, size, depth, accompanying curves. Door repair is a little more difficult than repairing the most common dent or rim repair in Dubai, but this should not be scary – the tool is really effective and ready to cope with such difficulties.
If you notice that the color of such a dent is different – do not be alarmed, you will not have to repaint the car. In fact, it was not your car that changed color, but some paint remained on it from the vehicle that scratched it. It is imperative that a repair technician inspects the dent before repairing and removes parts such as foreign paint particles, rust or dust. Therefore, after the completion of the repair, the color will completely match the original color of the car.
The complexity of repairing door dings
In fact, most of these damages can be easily repaired with Paintless Dent Repair. In this case, the glasses are not damaged – they are reliably protected by a cover. But sometimes access to the place of damage can be limited due to the design features of a particular car brand. Sometimes even the door needs to be dismantled. But this happens relatively rarely.
Door dings removal process
The technology of such work is well known to DentGuy specialists and has been worked out to the smallest detail. The procedure lasts as below:
- First, a thorough polishing of the dent is carried out in order to clearly see every scratch and every damage. This will make it possible to objectively assess the complexity of the work and what specific processes are to be undertaken;
- The back of the dent can be achieved with a small gap between the glass and the inside of the door. It is usually sufficient to remove the molding and protect the glass from damage, but sometimes the door design is such that you have to disassemble it. In any case, experts are well aware of which access method to use;
- The next step is a special highlight, which is displayed from the surface and tells you what kind of unevenness should be corrected. Step by step, the master goes through the entire area of the dent in order to completely eliminate it.
The whole process usually does not take much time, but it all depends on the total amount of work.