Correct tire selection and prevention of flat tires

Correct tire selection and prevention of flat tires

Tires and wheels are the most used parts of the car. They’re “where the rubber meets the road”–literally. When it comes to car maintenance and repair, your wheels and tires may not be the first thing that you think about.

However, a bent or damaged wheel can be very dangerous and expensive. Bent rims can pinch and pop your tires, leading to blowouts. They can also cause mechanical issues and problems with the handling and controlling of your vehicle, which can lead to dangerous situations.

Not sure how to identify or diagnose a bent tire rim? Here are the top 4 signs that your rim may be bent, and that your wheel should be replaced. Let’s get started.

What to Do When You Have a Flat?

What to Do When You Have a Flat

If a flat occurs, it is best not to panic and DO NOT drive on it. Safely maneuver to the side of the road and either install the spare tire (if one is supplied) or get a tow to a local tire shop. Although this means a minor inconvenience and/or cost in the short term, it’s worth it in the long run. You can do massive damage to your vehicle if you continue to drive and, you will put you and other motorists at risk.

How to Avoid a Flat

The best way to deal with a flat tire is to never have one. Cooper Tire has tips and advice regarding the most important factors when it comes to tire care:

  • Proper tire size, type and load capacity (or load range)
  • Proper inflation pressure
  • Proper vehicle loading
  • Regular tire rotation
  • Regular inspection
  • Proper tire repair
  • Vehicle condition, alignment, and maintenance
  • Good driving habits

The best way to deal with a flat tire is to never have one

Be sure to inspect your tires frequently–especially if you commute far distances often. Tires can become damaged easily while out on the road. Potholes and other rough bits of road and asphalt can cause your tire to bubble or cause the sidewall to tear. Extreme heat or extreme cold temperatures can also cause the tire pressures to fluctuate, so you will want to monitor your tire pressures year-round as well.

In short, you should always keep a close eye on your tire tread wear and tire condition, as this is critical to your safety when out on the road.

Category
Service
Price from
Wheels
Diamond Cut
300

All about Car Wheel Diamond Cutting Technology

This is the complete removal of the entire top layer from the surface of the discs in order to give them perfect evenness and shine. It could be done only in a specialized workshop using separate equipment – a special type of lathe. Such work is performed only at a high level – otherwise, you can simply harm the disk itself. The process is quite complex and should take longer than standard sanding.It recommended using only 1-2 times, because each time a thin layer of the disc is removed itself. So you can refurbish diamond cut alloy wheels only sometimes – but it’s worth it.
Read more about ➤ What is diamond cutting discs? ➤ Disc processing options.

Wheels
Wheel Rim Straightaning
200

Wheel Rim Straightening – How it Should be Done

Wheels are a very important part in a car or motorcycle, a lot depends on their serviceability – both fuel consumption, and traffic safety, and ease of driving. However, it happens that the wheels get damaged, and most often the rim bends. There can be many reasons for this – it is enough to run over a curb or not notice a hole in the road, unsuccessfully cross an obstacle or collide with an obstacle on the road. Regardless of how you receive such damage, it is important to immediately contact a repair shop after receiving it.
Read more about ➤ Is it important to straighten the rim? ➤ How long will it take to repair ➤ How can a bent rim be repaired?

Wheels
Wheel Rim Bend
200

A Bent Wheel Rim is a Common Problem

The first step to take is to run diagnostics to find out if the rim is subject to repair. Before you arrive for service, try not to damage the wheel further.
Then a professional tire technician will remove the tire from the wheel and clean the rim surface of any rust and dirt. The next steps of specialists will be associated with heating the surface of the rim and leveling it by placing it under a hydraulic press. Depending on the degree of bending, several such operations may be required.
Further steps will directly depend on the complexity of the repair. You may need to weld pieces of metal, use a lathe and other equipment for work. Professional craftsmen are usually ready for such difficulties. After finishing the leveling work, it may be necessary to powder or varnish.
Read more about ➤ How to know if the rim is bent ➤ Can a bent rim be straightened ➤ How can a bent rim be repaired?

Wheels
Cracked Wheel Repair
200

Professional Cracked Alloy Wheel Repair Welders

The alloy rims are not just accessories for the appearance of the car. They are also a very important part of any car. Like all other details, aluminium wheels have an ability to crack and bent. So let’s take a look at the main cracked rim causes.
In case if you have noticed a crack on your rims try to repair it as soon as possible. Our hard workers will help you to inspect the wheel on the availability of some scratch, cracks, bents and other defects. We are ready to do everything to fix your rims in the shortest time. Be sure that here you can get the best services at reasonable prices.
Read more about ➤ Professional Cracked Alloy Wheel Repair Welders at Your First Call ➤ How to Repair a Cracked Alloy Wheel by the Stages.

×

Powered by WhatsApp Chat

× How can I help you?